Ceiling-fan-red-wire-two-switches, one job that you can do at home without hiring an electrician is wiring a ceiling fan.this is a job for any home handyman. wiring a ceiling fan with two switches is not any harder than wiring one with three switches or just one switch.. It's common to use a three-conductor cable with a red wire to hook up a ceiling fan and lights so that the lights and fan are controlled by separate switches. the convention is to use the red hot wire for the fan and the black hot wire to control the lights. splice the neutrals and grounds together., copper or green wire is the ground wire and keeps your fan from experience power surges. if you have a blue and black wire coming from your household circuit, you should have two switches on your wall. if you had a red wire coming from your ceiling, it is hooked up to your wall switch..

A remote-controlled ceiling fan utilizes the free space within the fan's canopy. a remote is installed within the fan, and one of the two wall switches is bypassed in order for remote access. one of the switches within the working of the fan is connected to a remote, which can be controlled – as you may guess – remotely., switched lines and neutral connect to a 3-wire cable that travels to the light/fan outlet box in the ceiling. the fan control switch usually connects to the black wire and the light kit switch to the red wire of the 3-way cable. in this diagram, the black wire of the ceiling fan is for the fan, and the blue wire is for the light kit..

Wire your fan. in this article: single wall switch wiring | dual wall switch wiring note: if you do not feel comfortable wiring your hunter fan, please contact a certified electrician. the wiring instructions for your new hunter fan differ slightly based on the type of wall switch and your fan’s control system (pull chain, remote control, etc.)., how to install a ceiling fan with black, white, red & green wires. ceiling fans are often equipped with a separate light kit that hangs beneath the fan. most common electrical cables include three ....

Flip off the circuit breaker controlling the wall switch in the room. double-check that it is off by mounting a ladder to the ceiling fan. turn on a non-contact voltage tester and hold it up to the..., if the box in the ceiling has red, black, white, and green (or bare copper), then there is a wall switch which energizes the red wire. disconnect power at the circuit breaker box and check with a meter or test light that the black wire is not hot. also check the integrity of the white wire and the green/copper.