Lost-my-ceiling-fan-remote, first would be to simply buy a new remote and set the dip switches to match the pattern on the receiver inside the fan. the new unit will now operate the fan just as the old lost one did. second would be to remove the receiver and wire the fan directly to the house wiring so that it would operate with the pull chain. i hope this helps,. Ceiling fan remote control kit, small size universal ceiling fans light remote, speed, light & timing 3 in 1 wireless control, for harbor breeze hunter hampton bay lichler ceiling fans remote, last week, i posted an article about successfully rewiring my remote control ceiling fan to bypass the remote and work off of the wall switch. i had a couple questions, and judging by the lack of help i was able to find online, i thought i would put the information out there. *i am not….

Inside the fan where the pull chain makes connection is the remote control receiver. you must unwire this part and reconnect the wires color for color and then the wall switch and the pull chain will work like before it had a remote. ask your own appliance question was this answer helpful?, you can go to the home center and look for a replacement remote for that brand and model. you will have to drop the bell down from the ceiling and note the dip pin settings on the receiver. match the dip pin settings in the remote to those in the fan bell. you should be ready to go..

This is a question that gets asked often – what remote control do i purchase to replace my existing hunter remote control? this is actually a very common question as the remotes tend to get lost or broken quite often. before you go about purchasing a new remote (and we can help you to determine […], if the remote control was an add-on feature, then you will need to remove the fan from the ceiling (or just undo the canopy) and find the receiver that is located in the canopy of the fan. there...